A better and more effective way of cleaning water pipes with virtually no water loss.
NO-DES is an innovative and effective way of cleaning water mains with virtually no loss of water. It delivers a cost effective solution to traditional methods of cleaning water mains. This technology increases customer confidence, reduces operational costs and conserves water and environmental discharge.
Traditionally, water pipes have been flushed by opening fire hydrants and letting water discharge out into the street. The NO-DES system saves this water by attaching to two fire hydrants and creating a temporary above ground loop through which the water is circulated, cleaned and returned to the pipe. The NO-DES machine flushes the water between the hydrants at a velocity that intentionally stirs up the sediments, and then removes them in the purpose built NO-DES filters.
The NO-DES Method is Simple
1. EASY SET UP
A NO-DES truck with a massive 2 vessel filtering system pulls up between two fire hydrants in an area where water quality problems are being experienced.
2. CONNECT
A heavy-duty hose is connected from one fire hydrant to the NO-DES filtering system inlet point. A second hose is then connected to a second fire hydrant from the NO-DES outlet point.
3. CREATE “LOOP”
Both fire hydrants are opened, filling the hoses and filters, creating a temporary above ground loop in the water distribution system.
4. CIRCULATE
A large, variable speed pump on the NO-DES unit then circulates the water through the loop at very high speed in the opposite direction of the natural flow. This “stirs up” the sediments and biofilms inside the water main.
5. Clean and Disinfect
Practically all sediments and biofilms are removed as the water passes through NO-DES’s extremely fine 24-chamber filtration system. n.b. a small amount of chlorine is added during the process.
6. SHUT DOWN
When the entire section of water main between the hydrants has been flushed clean, the system is shut down, hydrants are closed and hoses removed. The entire process takes only 45 minutes from start to finish.
THE NO-DES SYSTEM
Traditionally, water pipes have been flushed by opening fire hydrants and letting water discharge out into the street.
The NO-DES system saves this water by attaching to two fire hydrants and creating a temporary above ground loop through which the water is circulated, cleaned and returned to the pipe.
The NO-DES machine flushes the water between the hydrants at a velocity that intentionally stirs up the sediments, and then removes them in the purposebuilt NO-DES filters.
WHY CHOOSE NO-DES?
• It requires no shutdown of the water supply.
• It is a no disruption, efficient, effective way of cleaning water pipes,
• Minimal disturbance to customers supply (unlike conventional flushing), as NO-DES does NOT require the pipe to be de-pressurised or supply
to be turned off
• It is self-contained, with no water flushed down the street.
• It works using very high velocities.
• It filters and re-circulates the water inside the pipes (down to one-micron absolute – approx. 100 times smaller than the diameter of a human hair).
• It is a controlled flow providing for reduced damage – no water hammer or pipe / lining erosion.
• Conserves two vital natural resources — water and the energy it took to produce and pump it.
• Water quality is not compromised with the addition of Chlorine back into the supply if required.